Ease of Service
• Prevents loss of parts during field service thanks to one-piece solenoid design with captured plunger.
• Non-rising flow control handle adjusts water flow as needed.
• Manual internal bleed with 1/4-turn of the solenoid operates the valve without allowing water into the valve box. Allows pressure regulator adjustment without turning on the valve at the controller.
• Solenoid with convenient handle.

Versatility
• Accomodates field-installed PRS-Dial pressure regulating modules adjustable from 1.0 to 6.9 bar (to be ordered separately)
• Also available in 9v solenoid configuration: 100-PGA-9V, 150-PGA-9V, 200-PGA-9V.
• Compatible with rain Bird decoder systems.

Reliability
• Slow closing to prevent water hammer and subsequent system damage.
• Double filtered pilot flow prevents clogging solenoid ports.

Models
• 100-PGA: 1” (26/34) BSP female threaded inlet and outlet • 100-PGA-9V: 1” (26/34) BSP female threaded inlet and outlet, latching solenoïd
• 150-PGA: 1,5” (40/49) BSP female threaded inlet and outlet
• 150-PGA-9V: 1,5” (40/49) BSP female threaded inlet and outlet, latching solenoid
• 200-PGA: 2” (50/60) BSP female threaded inlet and outlet
• 200-PGA-9V: 2” (50/60) BSP female threaded inlet and outlet, latching solenoid

Flow: 0,5 to 34.05 m3/h
Pressure: 1.0 to 10.4 bar (23° C)
Temperature: up to 43°C

Electrical specifications
Solenoid: 24 VAC - 50 Hz
Inrush current: 0.41 A (9.9 VA)
Holding current: 0.23 A (5.5 VA)
100-PGA
Height: 18.4 cm
Length: 14.0 cm
Width: 8.3 cm

150-PGA
Height: 20.3 cm
Length: 17.2 cm
Width: 8.9 cm

200-PGA
Height: 25.4 cm
Length: 19.7 cm
Width: 12.7 cm
Note: the PRS-Dial option adds 5 cm to the valve Heigh.